Slope Calculator

Free online Slope Calculator.

Calculator

How to Use

  1. Enter the coordinates of two points (x1, y1) and (x2, y2)
  2. Or enter the rise and run directly
  3. Choose to calculate slope, grade percentage, or angle
  4. View the result as a ratio, percentage, and angle in degrees

Formula

Slope (m) = (y2 - y1) / (x2 - x1) = Rise / Run
Grade (%) = Slope x 100
Angle = arctan(Slope) in degrees
Rise = Slope x Run
Run = Rise / Slope

Example Calculations

From two points

Input: Point 1: (2, 3), Point 2: (8, 15)

Result: Slope = 2.0, Grade = 200%, Angle = 63.43 degrees

Roof slope

Input: Rise: 6 inches, Run: 12 inches

Result: Slope = 0.5 (6/12), Grade = 50%, Angle = 26.57 degrees

About This Calculator

Calculate the slope, grade, and angle between two points. Free slope calculator for math, construction, roofing, and landscaping projects.

Our slope calculator is free, easy to use, and provides instant results. All calculations are performed in your browser for privacy and speed.

Related Calculators

Frequently Asked Questions

What is the difference between slope and grade?

Slope is rise/run as a ratio (e.g., 0.25). Grade is slope expressed as a percentage (25%). A 100% grade = 45-degree angle. Roads over 15% grade are considered very steep.

How do I calculate slope from two points?

Slope = (y2-y1)/(x2-x1). For points (2,3) and (6,11): slope = (11-3)/(6-2) = 8/4 = 2. This means for every 1 unit right, the line goes up 2 units.

What slope is needed for proper drainage?

Building codes require minimum 1/4 inch per foot (2% grade) for flat roofs. Driveways: 2-5% for drainage. ADA ramps: maximum 8.33% (1:12 slope) for wheelchair access.

How do I convert slope percentage to angle?

Angle = arctan(grade/100). A 100% grade = arctan(1) = 45 degrees. A 10% grade = arctan(0.1) = 5.71 degrees.